TYJ-160 Sleeve Capacitor Core Lap Former (J8616-2/ZF)

1. 卷繞長度 Winding length                    ≦16m

2. 卷繞成品直徑 Winding product diameter                最大 Max. Ф650mm

3. 芯管外徑范圍 OD range of the core tube                Ф81~Ф150mm

4. 芯管內徑范圍 ID range of the core tube              Ф51~Ф130mm

5. 芯管最大長度 Max. length of the core tube                16m

6. 卷繞芯子(工件)最大重量 Max. core weight       4噸 tons

7. 包扎紙帶 Bandaging tape

寬度 Width                90mm

紙卷外徑 OD of the paper coil            Ф470mm

紙卷內徑 ID of the paper coil            Ф76mm

平板紙帶厚度 Flat paper tape         0.09~0.13mm

皺紋紙帶厚度 Crepe paper tape         0.305mm;延伸率 Elongation 55%

8. 放紙小車一次可裝紙盤6盤紙卷;可裝鋁箔卷1盤

6 paper coils can be installed in the paper seeding car; 1 aluminum foil coil can be installed

9. 紙帶張力檢測與調整

平板紙帶 Flat paper tape              自動/手動調整 Automatically/Manually adjustment

皺紋紙帶 Crepe paper tape              自動調整 Automatically adjustment

10. 放紙小車的行走速度與主軸轉速按工藝要求匹配,疊包率:50%±0.5mm

The moving speed of the paper sending car matches with the rotation of the main shaft according to the process requirements.  Overlapping ratio: 50%±0.5mm

11. 車頭中心高 The height of the head center           1180mm

12. 主軸10~240rpm無級調速,有剎車離合裝置

10-240rpm stepless speed adjustment for the main shaft; with the brake clutch device

13. 配有靜電消除裝置,自動消除紙卷表面靜電

It has  electrostatic eliminator which can eliminator static electricity from  the paper surface automatically

14. 配有加熱輥,最高溫度300℃±20℃,自動控溫

It contains heating roll; Max. temperature is 300℃±20℃; automatic temperature control

15. 配有烘燈,烘烤長度16m,加熱管雙排26根。距離工件200mm處溫度為70±5℃

It has the oven lamp with 16m bake length. 26 pcs of the heating tubes in two rows. The temperature is 70±5℃ 200mm away from the workpiece

16. 配有自動激光標線,兩端定位,距離15m。自動移動范圍,左端0-7300mm,右端4200-15000mm;標線重復精度1mm

It has the automatic laser marking  positioning in two ends. The distance is 15 m. the automatic moving range, left end 0-7300mm, right end 4200-15000mm; Marking repeatability is 1mm